100 kgs Wheel Dolly

• Adjustable retaining arm designed for left-or right-hand use allows for better access in restricted areas
• For easy rotation of wheel alignment to studs and access to studs at all times

Product description

Product Information

This Wheel Dolly is ideal for fast, easy and safe removal and fitting of large industrial, commercial or agricultural tires. Includes a high speed hydraulic ram for quick and accurate adjustment.

Product Parameters

Model	TX00801	Capacity	100 kgs
Min.Height	1010 mm	Max.Height	1910 mm
N.W.	62 kgs	G.W.	66 kgs
Package Size	1175x710x242 mm	QTY/20'CY	117 PCS

Features

• Adjustable retaining arm designed for left-or right-hand use allows for better access in restricted areas

• For easy rotation of wheel alignment to studs and access to studs at all times

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone