这是描述信息
Search
20180108105626_894
20180108105739_814
20180108105742_694
20180108105811_754

2Ton Double Locking Jack Stands

• Ratchet type axle stand with cast iron support post and tough welded steel plate base.
• Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked.
• Double locking pin
20180108105626_894
20180108105739_814
20180108105742_694
20180108105811_754
Product description
Product Information
Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end of a vehicle. Use both stands for each operation.

 

Product Parameters

Model

T42002C

Capacity

2 Ton

Min. Height

275 mm

Max Height

420 mm

Product Size

/

Package Size

195x180x355 mm

N.W./G.W.

4.8/5.1 kg

QTY/20'CY

2088 Pairs

 
Features

•  Ratchet type axle stand with cast iron support post and tough welded steel plate base.

•  Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked.

•  Double locking pin

Common Problems And Solutions

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP