Tool Cabinet with Tools

The tool chests or cabinets are a great way to store and organize your tools for your shop or garage. They are manufactured using the highest grade of raw materials available. These steel tool storage systems are secured with a high-security tubular locking mechanism. Drawers are equipped with ball-bearing slides, removable EVA slip-proof liners and full-length aluminum drawer pulls for smooth operation.

Product description

Product Information

Product Parameters

Model	TBR9007B-X	Overall with Casters	724x470x1032 mm
2 Drawers	570x410x54 mm	4 Drawers	570x410x112 mm
1 Drawers	570x410x170 mm	N.W.(empty)	70.5 kgs
G.W.(empty)	76 kgs	Package	807x546x1050 mm
QTY/CTN	1 PC	QTY/20'CY	66 PCS

Features
. The drawers with ball bearing slides
. Heavy-duty casters for easy mobility
. Heavy-duty steel construction
. HMC high-security tubular locking system
. Large push handle for easy mobility

TRGJ5001
13 PCS Socket:4,4.5,5,5.5,6,7,8,9,10,11,12,13,14mm
9 PCS Deep Socket :5,6,7,8,9,10,11,12,13mm
23 PCS Socke Bit(6150):SL4,5.5,7 PH1,2,3 PZ1,2,3 Hex3,4,5,6,7,8
T8,T10,T15,T20,T25,T27,T30,T40
3 PCS Extension Bar:50,100,150m
1 PC Sliding T Bar1-Spinner Handle
1 PC Universal Joint dle: 400gr
9 PCS Hex Ball Key:1.5,2,2.5,3,4,5,6,8,10mm
1 PC Ratchet Handle(72T)

TRGJ5002
17 PCS Socket:6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22mm
2 PCS Spark Plug Socket: 16,21mm
2 PCS Extension Bar: 75,150mm
1 PC Sliding T Bar
1 PC Universal Joint
1 PC Ratchet Handle(72T)

TRGJ5012
7 PCS Hinged Socket Wrench 6*7,8*9,10*11,12*13,14*15,16*17,
18*19mm

TRGJ5009
16 PCS Combinatian Wrench 6,7,8,9,10,11,12,13,14,15,16,17,18,19,
22,24mm

TRGJ5003
20 PCS Socket:8,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,28
30,32mm
2 PCS Extension Bar: 125,250mm
1 PC Adaptor For Extension:3/8" "(F)*1/2" "(M)
1 PC Universal Joint
1 PC Ratchet Handle(72T)

TRGJ5015
5-Chisel:22*220,19*200,16*175,12*150,10*140mm
1 PC Cape Chisel:11*150mm
1 PC Center Punch:11*150mm
3 PC Taper Punch:5*130,4*130,3*130mm
3 PC Pin Punch:6*150,4*125,3*125mm

TRGJ5014
1 PC 300g Engineer Hammer(HICKOPY)
1 PC 400g Rubber Hammer

TRGJ5011
8 PCS Office Ring Wrench 6*7,8*9,10*11,12*13,14*15,16*17,18*19,21*23m

TRGJ5006
1 PC 200mm Long Nose Plier
1 PC 150mm Diagional Plier
1 PC 175mm Combination Plier

TRGJ5019
3 PCS Combinatian Wrench 27，30，32MM

TRGJ5010
11 PCS Double Open End Wrench 6*7,8*9,10*11,12*13,14*15,16*17,18*19,20*22,21*23,24*27,30*32mm

TRGJ5008
1-250mm Waterpump Plier
1-250mm Locking Plier

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.