这是描述信息
/
/
20 Ton Professional Hydraulic Shop Press
Search
20190330085743_336
20190330085823_523
20190330085823_966
20190330085824_147
20190330085824_413
20190330085825_198

20 Ton Professional Hydraulic Shop Press

• Safety valve
• Industry seals
• Robots welding
• Laser cutting frame
• Removable parts tray
• Foot pedal for pneumatic operation
• Pneumatic & manually pump with double speed action
20190330085743_336
20190330085823_523
20190330085823_966
20190330085824_147
20190330085824_413
20190330085825_198
Product description
<p style="clear:both;">
Product Information
<div class="col-md-6 col-sm-6 col-xs-12" style="float:left;">
 
<div>
 
This equipment is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening and forming tasks are required. Typical applications include installation and removal of alternator and power steering pump bearings, axle bearings, transmission bearings, seals, U-joints and many other jobs.
</div>
 
</div>
 
<div class="col-md-6 col-sm-6 col-xs-12" style="float:right;">
 
<div>
</div>
 
</div>
"con2">Product Parameters

Model

TRSP20HAM

Capacity

20 Ton

Air Pressure

0.9~1.2 Mpa

Package Size

1800x850x350 mm

N.W./G.W

140/146 kgs

QTY/20'CY

25 PCS

Features
• Safety valve
 
• Industry seals 
 
• Robots welding
 
• Laser cutting frame
 
• Removable parts tray
 
• Foot pedal for pneumatic operation
 
• Pneumatic & manually pump with double speed action

Common Problems And Solutions If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition. Never perform any maintenance on the equipment while it is under a load. Cleaning If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust with a penetrating lubricant. How the Ram Operates With release valve closed, an upward stroke of the jack handle draws oil from the reservoir tank into the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. A downward stroke of the jack handle releases oil into the cylinder, which forces the ram out. This extends the ram. When the ram reaches maximum extension, oil is bypassed back into the reservoir to prevent an over extended ram stroke and possible damage to the vérin. Opening the release valve allows oil to flow back into reservoir. This releases hydraulic pressure on the ram, which results in lowering the ram. Storing the Ram 1. Fully Retract Ram after use. 2. Place the handle in the upright position. 3. Store in a dry location, recommended indoors. Note: If the press is stored outdoors, be sure to lubricate all parts before and after use to ensure the press stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP