这是描述信息
/
/
300 KgsTire Dolly
Search
yan523 (1)
yan523 (2)
yan523 (3)
yan523 (4)

300 KgsTire Dolly

• Provides leverage technicians need to easily remove or install truck tire-and-wheel assemblies
• Heavy-duty rollers handle the big jobs
• 150-lb. lifting capacity for use with large tires
• All-steel construction for exceptional durability
• Big casters for easy movement
yan523 (1)
yan523 (2)
yan523 (3)
yan523 (4)
Product description

Product Information

 

This Torin Big Red Truck Tire and Rim Wheel Dolly is perfect for use moving heavy fleet truck tires and rims (semi and tractor trailer semi tires). The wheel dolly has rollers on each leg to allow wheels to be rotated for perfect stud alignment as wheel slides onto hub.

Product Parameters

Model

TRX4209

capacity

300 Kgs

N.W.

18 kgs

G.W.

18.5 kgs

Package Size

1540x620x440 mm

QTY/20’CY

200 PCS

Features

• Provides leverage technicians need to easily remove or install truck tire-and-wheel assemblies 
• Heavy-duty rollers handle the big jobs 
• 150-lb. lifting capacity for use with large tires 
• All-steel construction for exceptional durability 
• Big casters for easy movement 

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP