Search
1500KGS Vehicle Support Stand
Product description
Product Information
Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end of a vehicle. Use both stands for each operation.
AS 2538:2016
Product Parameters
|
Model |
TRYL1500 |
Capacity |
1500 kgs |
|
Min. Height |
315 mm |
Max Height |
415 mm |
|
N.W./G.W. |
5/5.3 kg |
Package Size |
630x265x345 mm |
|
QTY/CTN |
3 PCS |
MOQ |
200 PCS |
Features
• Large saddle surface area provides beter contact with the load being supported.
• Safety pin design adds extra safety and security.
• Large base size resists sinking into asphalt and similar surfaces.
Common Problems And Solutions
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
Scan the QR code to read on your phone
Previous
1Ton Engine Crane
Next
Screw Air Compressor
- TOP
