这是描述信息
Search
zq93
zq94
zq95
zq96

Air Compressor

• solid cast-iron construction for proven reliability
• Pump has removable cylinders and finned copper intercooler
• Overhung crankshaft is precision-balanced to run smoothly and quietly
• Includes alternator for battery charging
zq93
zq94
zq95
zq96
Product description

Product Information

This air compressor provides convenience and power. Built to last, this cast-iron, oil-lube compressor is designed for the toughest 100% continuous duty applications. Includes alternator, pressure switch and gauge. 

Product Parameters

 

Model

TRAE100VFL

Package Size

1090x400x840 mm

N.W.

54 kgs

G.W.

57 kgs

QTY/20'CY

50 PCS

   

Features

• solid cast-iron construction for proven reliability 

• Pump has removable cylinders and finned copper intercooler 

• Overhung crankshaft is precision-balanced to run smoothly and quietly 

• Includes alternator for battery charging

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP