这是描述信息
/
/
680 kgsHydraulic Self-loading Dolly
Search
a50
a51
a52
a53

680 kgsHydraulic Self-loading Dolly

• Easy foot-pedal lifting smoothly raises a vehicle up
• Rollers touch tire only
• 2 jacks permit full 180° vehicle pivot
• 4 jacks place vehicle on a 360° rolling platform
• Safety valve on each jack
a50
a51
a52
a53
Product description

Product Information

This Pair of Hydraulic Vehicle Positioning Jacks position vehicle in any direction on 4 strong casters each.

 

Product Parameters

Model

TRA9012L

Capacity

680 kgs

N.W.

18.5 kgs

G.W.

20.5 kgs

Package Size

680x620x220 mm

QTY/20’CY

320 PCS

 

Features
• Easy foot-pedal lifting smoothly raises a vehicle up

• Rollers touch tire only 

• 2 jacks permit full 180° vehicle pivot 

• 4 jacks place vehicle on a 360° rolling platform 

• Safety valve on each jack 

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP