这是描述信息
/
/
680kgs Engine Leveler
Search
cr27828763
cr8934369
cr879365365

680kgs Engine Leveler

• This engine load leveler makes engine removal and replacement easier.
cr27828763
cr8934369
cr879365365
Product description

Product Information

This universal engine leveler makes engine handling and positioning easier. Great for use with engine hoists or engine cranes. The swivel handle allows for easy adjusting. This equipment is specially designed to raise, lower and transport engines, differentials, transmissions, and other heavy loads with minimal effort. Tested for reliability and safety to meet ASME PASE standards.

 

Product Parameters 

Model

TRF2750

Capacity

680 kgs

N.W. / G.W.

5.2 kgs / 5.5 kgs

Package Size

480x280x220 mm

QTY/CTN

4 PCS

QTY/20'CY

2750 PCS

Features
•  This engine load leveler makes engine removal and replacement easier.  

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP