这是描述信息
/
/
UTV Loading Ramps
Search
a107
a108
a109

UTV Loading Ramps

. Easy-to-handle ramp folds twice to a compact size for easy storage
. Ramps have a stable side-carry handle built right in for easy transport
a107
a108
a109
Product description

Product Information

This Aluminum Ramps features an exclusive aluminum design that is strong, yet lightweight, and has an anti-skid surface plate. The arched design is ideal for loading lawn mowers and other low clearance equipment.

 

Product Parameters

Load Capacity

2800 kgs/pair

Length

2490 mm

Windth

305 mm

Thickness

110 mm

N.W.

19 kgs/pair

G.W.

20 kgs/pair

Package Size

2520x310x130 mm

QTY/20'CY

245 SETS

 

Features
. Easy-to-handle ramp folds twice to a compact size for easy storage

. Ramps have a stable side-carry handle built right in for easy transport

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.


 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP