这是描述信息
/
/
electric chain hoist
Search
qq1
qq2
qq3
qq4
qq5

electric chain hoist

• Shell: Light aluminum alloy shell shall be adopted wich is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design
• Inverse phase sequence protecting device:It is the special electrical installation which control the circuit not to work in case of wiring error in the power supply
• Limit switch: The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety
• 24V/36V decice: It is used to prohibit the emergencies from occurring in case of the leakage in the switch
• Side magnetic braking device: This device shall realize the instant brake in case of the power dump
• Chain bag: It shall be light, handsome and durable
• Chain: The chain shall adopt the imported FEC80 ultra heat-treatable Alloy steel chain
qq1
qq2
qq3
qq4
qq5
Product description

Product Information

Geared single running manual trolley is a simple and useful structure, easy for carry and operate This type is driven by chain, it can be used together with Chain hoist or other lifting products to match the composition of lifting and transporting• It can freely run in a certain radius of curvature of the I-beam track along the upper and lower wings, installed in the straight or the curve of the monorail overhead transport line or manual single-beam bridge. It is widely applicable to factories, mines, docks, shipyards, warehouses and computer room and other places to install machines, lifting goods, especially for locations with no power equipment installation.

 

Product Parameters

Model

TRYT125

Capacity

125 kgs

N.W. / G.W.

21.5/22 kgs

Package Size

376x305x250 mm

QTY/20'CY

2000 PCS

        MOQ         50PCS

 

Features
• Shell: Light aluminum alloy shell shall be adopted wich is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design

• Inverse phase sequence protecting device:It is the special electrical installation which control the circuit not to work in case of wiring error in the power supply

• Limit switch: The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety

• 24V/36V decice: It is used to prohibit the emergencies from occurring in case of the leakage in the switch

• Side magnetic braking device: This device shall realize the instant brake in case of the power dump

• Chain bag: It shall be light, handsome and durable

• Chain: The chain shall adopt the imported FEC80 ultra heat-treatable Alloy steel chain

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP