这是描述信息
Search
zxx1
zxx2
zxx3
zxx4

Chain Block

• Easy manual operation
• Double hand guides for smooth movement, efficient gear reductions minimize hand chain overhaul to lift loads
• Open frame design for easy cleaning and inspection
• Encased and retained roller bearings for increased efficiency and ease of maintenance
zxx1
zxx2
zxx3
zxx4
Product description

Product Information

The chain block is durable and easy to operate. High-quality steel components make it ideal for industrial applications. The compact design and low headroom allows for installation in confined areas.

 
Product Parameters
 
 
 

Model

TRC9020(HS2)

Capacity

2 Ton

Lift Height 

25  mm

 

Headroom

380 mm

Chainpull to Lift Full Load

330N

 

No. of Load Chain

2

N.W./G.W. 

12.3/12.6 kgs

 

Package Meas

280x190x140 mm

QTY/20'CY

1417 PCS

   

 

Features
• Easy manual operation

• Double hand guides for smooth movement, efficient gear reductions minimize hand chain overhaul to lift loads

• Open frame design for easy cleaning and inspection

• Encased and retained roller bearings for increased efficiency and ease of maintenance

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP