这是描述信息
Search
45 (2)
45 (3)
45 (4)
45 (5)

Air Hose Reel

• Unique winding system automatically layers the hose back and forth across the reel
• Adjustable hose stopper
• Hose latching mode switch - free wheeling
• Position locking bracket mounts on wall, ceiling, service truck, etc.
45 (2)
45 (3)
45 (4)
45 (5)
Product description

Product Information

Air hose reel is designed to keep air hoses wrapped into together and stored safely and neatly. It can be mounted on the wall or ceiling and it is usually used in garages or car repair plant. A compressed air hose reel provides the ability to store a compressed air hose to save space.  Air hose reels keep the air hoses in the garages clean, fresh and ready to use at any time. In addition, tripping accidents often happen in the garages because of the loose air hoses, which can be well solved by using air hose reels.

Product Parameters

Model

TRI03015Q

Hose Length

15+1.5M/50FT

Hose Material

口PVC

Case Material

PP

Working Pressure

18 Bar

Fitting

口1/4'BSPT 口1/4'NPT

Hose Size

口 3/8"

Gw/nm.

7.3/6.7 kgs

Packing Size(1pc)

440x225x410 mm

Packing Size(1pc)

1PC/CTN

20-QTY

690 PCS

MOQ

50PCS

 

Features

•  Unique winding system automatically layers the hose back and forth across the reel

•  Adjustable hose stopper

•  Hose latching mode switch - free wheeling

•  Position locking bracket mounts on wall, ceiling, service truck, etc.

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP