这是描述信息
Search
53 (3)
53 (4)
53 (2)
53 (1)

1000 kgsHand Pallet Stacker

• Walk-behind manual pallet stacker
• Ideal for smaller warehouses, retail floors
• Perfect for use where pollution and noise are not allowed
53 (3)
53 (4)
53 (2)
53 (1)
Product description

Product Information

 

The Hand Winch Truck is a compact lift truck designed to lift material to and from shelves, move office equipment, and install ceiling/wall appliances. 

Product Parameters

Model

TRE8310

Capacity

1000 kgs

Max.lifting Height

1000 mm

Lowered fork height

85 mm

Fork Length

1150 mm

Fork Width

330-740 mm

N.W.G.W

210 kgs/228 kgs

Package size

1600x760x2030 mm

QTY/20'CY

29PCS

   

 

Features

• Walk-behind manual pallet stacker 

• Ideal for smaller warehouses, retail floors 

• Perfect for use where pollution and noise are not allowed 

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP