Search
Hydraulic high-lift pallet jack
• The slowly descending system could protect the truck and cargo from damaging effectively.
• The equipped safety valve could precent over loading effectively.
Product description
Product Information
This High-Lifting Hydraulic Pallet Truck makes easy work of transporting and lowering heavy, awkward loads. Designed to reduce fatigue and increase operator safety and efficiency. The powerful hand pump lifts one ton loads to a max. or works to move standard pallets on the ground.
Product Parameters
|
Model |
TRE8220C |
Power supply |
4000/5000 kgs |
|
Max.Fork Heiaht |
550 mm/685 mm |
Fork Length |
1100 mm/1220 mm |
|
Max.fork height |
800 mm |
N.W. / PC |
110 kqs/125 kqs |
|
G.W. / PC |
120 kqs/135 kqs |
1#Package size |
1950X560X750mm |
|
2#Package Size |
1950X700X750 mm |
QTY/20'CY |
96 PCS |
Features
• It could be used for carrying and also as platform.
• The slowly descending system could protect the truck and cargo from damaging effectively.
• The equipped safety valve could precent over loading effectively.
Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
Scan the QR code to read on your phone
Previous
Hydraulic Pallet Jack
- TOP
