这是描述信息
Search
57 (2)
57 (8)
57 (1)
57 (2)

Hydraulic Pallet Jack

• High quality integrated cast cylinder
• Oil cylinder is equipped with permanent flow valve to ensure steady descend for the goods because of over loading.
• High-balanced intensifying frame
• Economical,superior cost performance
• High strength “C” type fork
• High strenght welding hydraulic,preeure oil cylinder,equipped with safety valve
57 (2)
57 (8)
57 (1)
57 (2)
Product description

Product Information


The Low-Profile Pallet Truck with 48 1/16in.L fork length features a super-lowered clearance height that easily and freely enters low-profile pallets where a standard pallet jack won't work. 

Product Parameters

Model

TRE8220C

Power supply

4000/5000 kgs

Max.Fork Heiaht

185/175 mm

Fork Length

85/75 mm

Max.liftinq Height

>110 mm

N.W. / PC

175 kgs/180 kgs

G.W. / PC

155 kgs/160 kqs

1#Package size

2000x600x700 mm

2#Package Size

2200x700x700 mm

QTY/20'CY

96 PCS

 

Features

• High quality integrated cast cylinder

• Oil cylinder is equipped with permanent flow valve to ensure steady descend for the goods because of over loading.

• High-balanced intensifying frame

• Economical,superior cost performance

• High strength “C” type fork

• High strenght welding hydraulic,preeure oil cylinder,equipped with safety valve

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP