Search
62 (1)
62 (6)
62 (5)

Mini Tilting lift

. Open-center design with no cross members provides clear under-vehicle access
. Quick connect/disconnect hoses for fast and convenient setup
. Powerful hydraulic cylinders eliminate the need for screw mechanisms
. Compact design easily stows in the trunk or back seat of most cars when not in use
. Power unit features built-in hydraulic flow divider for precise equalized lifting
. Convenient handles allow for easy positioning of the jack frames
. Integrated power-assist canisters increase the lowering speed
. Hydraulic cylinders feature integrated velocity-fuse safety valves
62 (1)
62 (6)
62 (5)
Product description

Product Information

 

It can fit where other jacks don't. No-assembly setup offers unmatched practicality and portability. Just position the lightweight jack frames under the vehicle, push the raise button on the handheld remote and the entire vehicle is lifted in a matter of seconds. 

 

Product Parameters

Model

TAL15001

Capacity

1500 kgs

Net Weight

58 kgs

Gross Weight

75 kgs

N.W./G.W.

/

Package Size

1700x860x260 mm

QTY/20'CY

 33 PCS

   

 

Features

. Open-center design with no cross members provides clear under-vehicle access

. Quick connect/disconnect hoses for fast and convenient setup

. Powerful hydraulic cylinders eliminate the need for screw mechanisms

. Compact design easily stows in the trunk or back seat of most cars when not in use

. Power unit features built-in hydraulic flow divider for precise equalized lifting

. Convenient handles allow for easy positioning of the jack frames

. Integrated power-assist canisters increase the lowering speed

. Hydraulic cylinders feature integrated velocity-fuse safety valves

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Previous
  • TOP