这是描述信息
Search
2Ton Pull-back Ram1
2Ton Pull-back Ram2
2Ton Pull-back Ram3
2Ton Pull-back Ram4

2Ton Pull-back Ram

PortablePowerKitsaredesignedtobeusedforpushing,spreading,andpressingofvehiclebodypanelsaswellasvariouscomponentpartsandassemblies.
2Ton Pull-back Ram1
2Ton Pull-back Ram2
2Ton Pull-back Ram3
2Ton Pull-back Ram4
Product description
ProductInformation

 

Portable Power Kits are designed to be used for pushing, spreading, and pressing of vehicle body panels as well as various component parts and assemblies.

Model

TRK1202

Capacity

2 Ton 

Max. Length

575 mm

Storke

120 mm

N.W. / G.W.

22/24 kg

Package Size

600x290x230 mm

QTY/20'CY

4200 PCS

Features

•  Constructed of high-grade steel and built to exacting standards for quality and durability.

•  Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.

•  Paint is oil, grease and dirt-resistant for easy cleanup.

•  Pump has an automatic overload system to help prevent damage to rams and equipment.

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP