Search
20190319135759_802
20190319135833_868
20190319135834_112
20190319135835_381
20190319135837_834

3.5 Ton Low Profile Scissor Lilt

• Minimize your shop space and increase working height with this lift
• Lower profile and takes up limited space
• Pneumatic self locking mechanisms
• Quiet and smooth operation
• Great for tire shops and oil changing stations that wants to increase speed and reliability
• Multi-voltage power supply is available for electrical requirements
• Optional motors
• Durable powder coat finish
20190319135759_802
20190319135833_868
20190319135834_112
20190319135835_381
20190319135837_834
Product description

Product Information

Space-saving design helps turn wasted floor space into a valuable service area. Lift raises speeding in just under one minute. Automatic safety locks secure lift at multiple service heights• An ergonomic control panel features simple push-button up and down controls and pneumatic safety release. Item too large for lift gate. Requires forklift on site for unloading.

Product Parameters

Model

QJYJ35

Capacity

3.5 Ton

Min ground clearance

/

Max ground clearance

1830mm

Rise time

60 sec.

 Drop time

45 sec.

Power of moter

3.0 kw

Power of supply

380V / 220V

Tabel Size

4500x650 mm

 Width betweenTable

900 mm

N.W./G.W.

2210/2250 kgs

1#Package size

4610x660x962 mm

2#Package size

1180x580x470 mm

QTY/20.CY

6 PCS

 

Features
• Minimize your shop space and increase working height with this lift

• Lower profile and takes up limited space

• Pneumatic self locking mechanisms

• Quiet and smooth operation

• Great for tire shops and oil changing stations that wants to increase speed and reliability

• Multi-voltage power supply is available for electrical requirements

• Optional motors

• Durable powder coat finish

Common Problems And Solutions
Sequence of Lockout Procedure

1) Notify all affected employees that a lockout is being performed for servicing or maintenance and that the lift must be shut down and locked out to perform the servicing or maintenance

2) Unload the subject lift (remove vehicle). Shut it down and assure the disconnect switch is "OFF" if one is provided on the lift.

3) The authorized lockout person operates the main energy isolation device removing power to the lift being taken out of service. Stored or residual energy (such as capacitors, springs, elevated machine members, hydraulic systems, air, or etc.) must be dissipated or restrained by methods such as grounding, repositioning, blocking, bleeding down, etc.

If this is a lockable device, the authorized lockout person places the assigned padlock on the device to prevent its unintentional reactivation. An appropriate tag is applied stating the person's name, at least 3" x 6" in size, an easily noticeably color, and states not to operate device or remove tag. If this device is a non-lockable circuit breaker or fuse, replace circuit with a "dummy" device and tag it appropriately as mentioned above.

4) Ensure that the equipment is disconnected from the energy sources' by first checking that no personnel are exposed, then verify the isolation of the equipment by operating the push button or other normal operating controls' or by testing to make certain the equipment will not operate. . Be sure to return any switches to the "OFF" position.

5) The equipment is now locked out and ready for the required maintenance or service.

 

Restoring Equipment to Service

1) Check the lift and the immediate area around the lift to ensure that nonessential items have been removed

(clear all tools, vehicles and personnel) and that the completion of all lift components are operationally intact.

2) The authorized person can now remove the lock (or dummy circuit breaker or fuse) and tag. Activate the energy

isolating device so that the lift may again be placed into operation.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP