60/40/22/11Ton Professional Pneumatic Floor Jack

• Features a powerful air motor for lifts of rated load.
• Built-in bypass hydraulic system to prevent from accident overloading.
• Extra long handle for easy positioning and moving.

Product description

Product Information

This BIGRED product has a powerful air motor to lift heavy loads. A quick lift system allows the lifting ram to come in contact with the load faster. The compact design easily fits between dual tandem axles. Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment and more.

Product Parameters

Model	TRA60-4AL	Capacity	60/40/22/11 Ton
Min. Height	150 mm	Lifting Height	60T: 57mm 40T: 60mm 22T: 61mm 11T: 65mm
N.W./G.W.	62/65 kg	Handle Box	1390x280x110 mm
Package Size	1000x300x240 mm	QTY/20'CY	160 PCS

Features

• Features a powerful air motor for lifts of rated load.

• Built-in bypass hydraulic system to prevent from accident overloading.

• Extra long handle for easy positioning and moving.

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone