Search
20180116144503_264
20180116144517_603
20180116144518_666
20180116144520_671

car tire changer

Semi-automatic sideswing arm special for motorcycle tire-changing
20180116144503_264
20180116144517_603
20180116144518_666
20180116144520_671
Product description

Product Information

This Ranger Products Electric Tire Changer Machine is one of the most durable and ergonomically engineered tire changers ever. Clamping capacity handles larger tires and wheels.  

 

 

 

Product Parameters
 
 

Motor power

0.75 kw/0.55 kw/1.1 kw

Power supply

220 V/400 V/110 V

Max.wheel diameter

41”(1040mm)

Max.wheel width

14"(355 mm)

Clamping

6"~24" 

Noise level

<75 db

Air supply

8 bar

Bead breaker force

2500 kgs

N.W./G.W.

170/194 kgs

Package size

960x760x1030 mm

QTY/20'CY

36 PCS

 

Features
Semi-automatic sideswing arm special for motorcycle tire-changing

 

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
 
Cleaning
 
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
 
Do not use motor oil or grease to lubricate the equipment
 
Rust Prevention:
 
-Check daily for any signs of rust or corrosion.
 
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
 
Storing the Equipment
 
1. Store in a dry location, recommended indoors.
 
2. Equipment should be stored in an area where they will not be subjected to damage.
 
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
 
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
 
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
 
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
 
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
 
 
 
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP