Search
Tire Vulcanizing Machine
• It is mainly applicable to the repair of various tube tires, small-size cover tyres and vacuum tires.
Product description
Product Information
Product Parameters
|
Model |
TRAD001Q |
Input voltage |
220 V or 110V |
|
Input power |
500 W |
Repair area |
60x60 mm |
|
Sinqle G.W/N.W |
8.95/7.9 kgs |
Sinqle Package Size |
330x195x510 mm |
|
G.W/N.W. |
37.5/35.8 kgs |
Packgae size |
685x415x535 mm |
|
QTY/CTN |
4 PCS |
QTY/20'CY |
160 PCS |
Features
• The machine is of automatic constant temperature. It is featured by power signal indication, short circuit protection, and optional fixed-time work or normally ON, etc.
• It is mainly applicable to the repair of various tube tires, small-size cover tyres and vacuum tires.
Common Problems And Solutions
If you use and maintain your equipment properly, it will give you many years of service. Follow the
maintenance instructions carefully to keep your equipment in good working condition. Never perform any
maintenance on the equipment while it is under a load.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean
the equipment. Remove any existing rust, with a penetrating lubricant.
Lubrication
This equipment will not operate safely without proper lubrication. Using the equipment without proper
lubrication will result in poor performance and damage to the equipment. Some parts in this equipment are not
self-lubricating inspect the equipment before use and lubricate when necessary. After cleaning, lubricate the
equipment using light penetrating oil, lubricating spray.
-Use a good lubricant on all moving parts.
-For light duty applications, use lubrication once a month.
-For heavy and constant application, weekly lubrication is recommended.
-NEVER USE SANDPAPER OR ABRASIVE MATERIAL ON THESE SURFACES!
With release valve closed, an upward stroke of the long ram handle draws oil from the reservoir tank into
the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. A
downward stroke of the long ram handle releases oil into the cylinder, which forces the ram out. This raises
the hydraulic ram. When the ram reaches maximum extension, oil is bypassed back into the reservoir to
prevent an over extended ram stroke and possible damage to the long ram. Opening the release valve allows
oil to flow back into reservoir. This releases hydraulic pressure on the ram, which results in lowering the
hydraulic ram.
Storing the Crane
1. Lower the Lifting Arm.
2. Place the handle in the upright position.
3. Store in a dry location, recommended indoors.
Note: If the crane is stored outdoors, be sure to lubricate all parts before and after use to ensure the crane
stays in good working condition.
Scan the QR code to read on your phone
Previous
Tire Vulcanizing Machine
- TOP
