这是描述信息
/
/
Compact tubing bender
Search
w61
w62
w63
w64

Compact tubing bender

• Telescoping handle provides the reach that you need
w61
w62
w63
w64
Product description
Product Information

The Benchtop Compact Metal Bender makes duplicate or one-of-a-kind parts in the shop, in your truck or on the jobsite! (Will not bend conduit or exhaust pipe).

.

 

 

 

Product Parameters

 

Model

TRA6001

Die Size

25.4/31.75/44.45/50.8/63.5/67 mm

N.W.

24 kgs

G.W.

26 kgs

Package Size

920x280x270 mm

QTY/20'CY

650 PCS

MOQ

30 PCS

   

 

 

Features

• Telescoping handle provides the reach that you need 

 

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP