Search
20171228101812_300
20171228102211_779
20171228102213_181
20171228102214_359
20171228102215_240

500 Kgs Motorcycle Lift

• Includes heavy duty wheel vise
• Foot control pedals are removable
• Features removable safety lock bar
• Features adjustable stabilizer posts
• Operates either via air or foot power
• Includes extra long removable ramp
20171228101812_300
20171228102211_779
20171228102213_181
20171228102214_359
20171228102215_240
Product description

Product Information

The light duty lift is perfect for guys that only work on motorcycles. With a solid 12-gauge steel construction and powder coat finish, this lift is a sturdy piece of equipment that is a great addition to any mechanic's home garage. Equipped with a heavy duty, rubber padded wheel vise and an air over hydraulic power unit.  

 

 

 

 

Product Parameters
 
 

Model

TRM01109

Capacity

500 kgs

Stock

470 mm

Lifting Height

470 mm

N.W.

48 mm

G.W.

53 mm

Package Size

1200x550x390 mm

QTY/20’CY

1 PC

MOQ

100 PCS

   

 

Features
• Includes heavy duty wheel vise
 
• Foot control pedals are removable
 
• Features removable safety lock bar
 
• Features adjustable stabilizer posts
 
• Operates either via air or foot power
 
• Includes extra long removable ramp
 
 
 

 

Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
 
Cleaning
 
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
 
Do not use motor oil or grease to lubricate the equipment
 
Rust Prevention:
 
-Check daily for any signs of rust or corrosion.
 
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
 
Storing the Equipment
 
1. Store in a dry location, recommended indoors.
 
2. Equipment should be stored in an area where they will not be subjected to damage.
 
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
 
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
 
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
 
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
 
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
 
 
 
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Next
  • TOP