这是描述信息
Search
20180105103310_248
20180105103330_898
20180105103331_269
20180105103333_107

22Ton Pneumatic Jack

• Features a powerful air motor for lifts of rated load.
• Built-in bypass hydraulic system to prevent from accident overloading.
• Extra long handle for easy positioning and moving.
20180105103310_248
20180105103330_898
20180105103331_269
20180105103333_107
Product description
Product Information
This BIGRED product has a powerful air motor to lift heavy loads. A quick lift system allows the lifting ram to come in contact with the load faster. The compact design easily fits between dual tandem axles. Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment and more.

 

Product Parameters

Model

TQ22001

Capacity

22 Ton  

Min. Height

220 mm

Max Heigh

435 mm

Air Pressure (Mpa)

0.7~1.2

N.W./G.W.

45/47 kg

Package Size

675x390x260 mm

QTY/20'CY

352 PCS

 
Features
 

•  Features a powerful air motor for lifts of rated load.

•  Built-in bypass hydraulic system to prevent from accident overloading.

•  Extra long handle for easy positioning and moving.

 

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP