The Stand perfect for lifting you bike or motorcycle to carry out essential maintenance.
With its light weight yet sturdy design the stand will simply and safely lift your bike allowing you to work as required on your bike at home in the garage or out at the track.
This stand is designed for the front wheel or rear wheel of your bike, however it may fit a more narrow rear wheel.
High quality heavy duty front motorcycle paddock stand.
. Folds out to enable the bike to be lifted by the front steering head tube.
. Designed to offer maximum access to the front end of the bike for all repair, cleaning and maintenance work.
. Simple strong and functional design
. High quality fixed wheels for a smooth lift every time.
. Designed for maximum stability under load.
. Manufactured from robust tubular steel.
. Long, lasting and durable construction for a long service life.
Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.