Search
Fender Reforming Tool
• Simple and easy to use;
• Roller works on fender from inside wheel well;
• Attached hitch pin allows for wide or narrow angle;
• Adjustable arm has second telescoping arm with roller that allows for 180 degrees wheel swivel
Product description
Product Information
Fender roller is one of the most common reforming tools in the auto repair industry. The body is made of iron which possesses of excellent hardness. The fully adjustable arm allows you to pull or push gradually. This fender roller is easy to face variety of needs and is the perfect choice for your vehicle fender repairing.
Product Parameters
|
Model |
TRF06011 |
N.W. |
7 kgs |
|
G.W. |
8 kgs |
Package Size |
370x350x150 mm |
|
QTY/20’CY |
1500 PCS |
|
|
Features
• Use for fender collision repair or fender or to increase fender clearance; 2.Fit most cars and light trucks with 4 or 5 lugs;
• Simple and easy to use;
• Roller works on fender from inside wheel well;
• Attached hitch pin allows for wide or narrow angle;
• Adjustable arm has second telescoping arm with roller that allows for 180 degrees wheel swivel
Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
Scan the QR code to read on your phone
Previous
Tool cabinet TB47 series TBT4704A-X
- TOP
