/
/
Hydraulic Drum Transporter S Drum Transporter
Search
q37
q38
q39
q40

Hydraulic Drum Transporter S Drum Transporter

q37
q38
q39
q40
Product description

 Product Information

This Vestil Lo-Profile Drum Caddy reduces injuries caused by manually lifting and moving drums. 

 

  

 

.

 

 

 

Product Parameters

 

Model

TRGA2502

Capacity

250 kgs

Lifting Height

280 mm

Max.Diameter

600 mm

Max.Length

915 mm

Overall Length

800 mm

Overall Width

760 mm

Overall dimension

620x780x1250 mm

N.W.

40 kgs

G.W.

45 kgs

QTY/Package

2 PCS/CTN

Package Size

900x900x350 mm

QTY/20'CY

72 PCS

 

 

 

 

Features

 

 

 

 

 

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
  • TOP