- Inquiry
5Ton Moving Trolley
• Shel: Light aluminum alloy shell shall be adopted wich is light but hard and ft for the use in the terible work environment with a high heat dissipation rate and all tightness design. • Inverse phase sequence protecting device:t is the special electrical installation which control the circuit not to work in case of wiring error in the power supply. • Limit switch: The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety. • 24V/36V decice: lt is used to prohibit the emergencies from occurring in case of the leakage in the switch. • Side magnetic braking device: This device shall realize the instant brake in case of the power dump. • Chain bag: lt shall be light, handsome and durable. • Chain: The chain shall adopt the imported FEC80 ultra heat-treatable Alloy steel chain.
PRODUCT PARAMETERS
| Type | TRC9E0502 |
| Capacity | 5 Ton |
| Speed 50Hz | 11/21 m/min |
| Motor | 0.75 Kw |
| Minimum radius of ture | 1.8 |
| QTY/20'CY | 90 PCS |
OTHER MODELS
About the Product
Product Information
Multi-purpose tool: lifting, lowering, pulling, stretching.Use anywhere: farming, gardening, machine shop, camping, boating, traveling, hobby shop, trucking, hunting, sports.
Product Parameters
| Type | Capacity (Ton) |
Speed 50Hz (m/min) |
Motor (Kw) |
Minimum radius of ture |
QTY/20'CY (PCS) |
| TRC9E0052 | 0.5 | 212.2/24 | 0.12 | 0.8 | 230 |
| TRC9E0102 | 1 | 11/21 | 0.4 | 0.8 | 160 |
| TRC9E0202 | 2 | 11/21 | 0.4 | 0.8 | 150 |
| TRC9E0302 | 3 | 11/21 | 0.75 | 1.0 | 140 |
| TRC9E0502 | 5 | 11/21 | 0.75 | 1.8 | 90 |
| TRC9E0752 | 7.5 | 11/21 | 0.75 | 2.5(3.0) | 80 |
| TRC9E1002 | 10 | 11/21 | 0.75 | 2.5(3.0) | 70 |
Matters need attention
Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning:
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment.
Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment:
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments. 6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
Ingredients-
Premium hydraulic oil. P.reventing from oil leakage
Hydraulics are powered with high quality oil,which offers better corrosion resistance and high/low temperature flexibility,allowing unit to operate at temperatures between 40 degrees F and 105 degrees F.
Automatic welded
This valve is welded in fine steel, having the features of handy to operate, good seal, reliable performance and having the function of automatic air-locking dropping material.
High Stregth Steel
Constructed of high-grade steel and built to exacting standards for quality and durability.
You May Also Like
Model
3.5 Ton Full-rise Scissor Lift QJYJ35DF
0.75/0.55/1.1kw Car Tire Changer
0.75/0.55/1.1kw Car Tire Changer
560KG Gear-Driven Rotating Engine Stand
680KG Gear-Driven Rotating Engine Stand
500KG Structure Engine Stand
Features
• Mechanical safety lockengaged automaticallywhen lowering • Low voltage control unit • Platform extending for long vehicles • Hight limit switch • Easy access grease nipple design • Secondary descending alarm& stop • Rubber pads115x100x70mm 4pcs • Infrared synchronization protection system • Drive-by-wire control
• Full automatic penumatic tilting column. Independent right helper arm, with pneumatic tire lifting device 360 rotary tire pressing helper arm. Four angle directional adjustable tire pressing shovel.
• Full automatic penumatic tilting column. Independent right helper arm, with pneumatic tire lifting device 360 rotary tire pressing helper arm. Four angle directional adjustable tire pressing shovel.
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.