- Inquiry
30Ton Hydraulic Shop Press
• Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. • Paint is oil, grease and dirt-resistant for easy cleanup. • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life. • Piston-ram is treated and polished to resist skiving. • Piston-ram utilizes a Y-Style polyurethane sealing ring with backup ring, preventing load from falling slowly or bypassing oil drift. • Extra-long handle included for easy pumping force.
PRODUCT PARAMETERS
| Model | TY30030 |
| Capacity | 30TON |
| Stroke | 150mm |
| Work Range | 0~940mm |
| N.W. | 135 kgs |
| G.W. | 159 kgs |
| Package Size | 1700x835x300 mm |
| QTY/20'CY | 42 pcs |
OTHER MODELS
About the Product
Product Information
This equipment is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening and forming tasks are required. Typical applications include installation and removal of alternator and power steering pump bearings, axle bearings, transmission bearings, seals, U-joints and many other jobs.
Product Parameters
| Model | Capacity |
Stroke (mm) |
Work Range (mm) |
N.W. (kgs) |
G.W. (kgs) |
Package Size (mm) |
QTY/20'CY |
| TY20030 | 20TON | 175 | 0~900 | 106 | 133 | 1700x835x300 | 42PCS |
| TY30030 | 30TON | 150 | 0~940 | 135 | 159 | 1700x835x300 | 42PCS |
| TY50030 | 50TON | 200 | 0~920 | 297 | 345 | 2008x1168x428 | 20PCS |
| Model | TY20021 TY20021Q TY20022 TY20030 |
TY30021 TY30021Q TY30022 TY30030 |
TY50021 TY50021Q TY50030 |
TY75021 |
| A(mm) | 710 | 710 | 990 | 1146 |
| B (mm) | 560 | 560 | 795 | 795 |
| C(mm) | 1550 | 1550 | 1825 | 1865 |
| D (mm) | 1650 | 1700 | 1940 | 1950 |
| E (mm) | 510 | 510 | 710 | 800 |
| F(mm) | 150 | 150 | 220 | 250 |
| G(mm) | 175 | 175 | 200 | 240 |
| H(mm) | 0~900 | 0~940 | 0~920 | 0~900 |
| J(mm) | Φ48 | Φ54 | Φ75 | Φ93 |
| M (mm) | ±125 | ±125 | ±125 | ±140 |
Matters need attention
Common Problems And Solutions
If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition. Never perform any maintenance on the equipment while it is under a load.
Cleaning:
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust with a penetrating lubricant.
How the Ram Operates:
With release valve closed, an upward stroke of the jack handle draws oil from the reservoir tank into the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. A downward stroke of the jack handle releases oil into the cylinder, which forces the ram out. This extends the ram. When the ram reaches maximum extension, oil is bypassed back into the reservoir to prevent an over extended ram stroke and possible damage to the vérin. Opening the release valve allows oil to flow back into reservoir. This releases hydraulic pressure on the ram, which results in lowering the ram.
Storing the Ram:
1. Fully Retract Ram after use.
2. Place the handle in the upright position.
3. Store in a dry location, recommended indoors.
Note: If the press is stored outdoors, be sure to lubricate all parts before and after use to ensure the press stays in good working condition.
Ingredients-
Premium hydraulic oil. P.reventing from oil leakage
Hydraulics are powered with high quality oil,which offers better corrosion resistance and high/low temperature flexibility,allowing unit to operate at temperatures between 40 degrees F and 105 degrees F.
Automatic welded
This valve is welded in fine steel, having the features of handy to operate, good seal, reliable performance and having the function of automatic air-locking dropping material.
High Stregth Steel
Constructed of high-grade steel and built to exacting standards for quality and durability.
You May Also Like
Model
3.5 Ton Full-rise Scissor Lift QJYJ35DF
0.75/0.55/1.1kw Car Tire Changer
500KG Structure Engine Stand
800KG Gear-Driven Rotating Engine Stand
680KG Gear-Driven Rotating Engine Stand
560KG Gear-Driven Rotating Engine Stand
Features
• Mechanical safety lockengaged automaticallywhen lowering • Low voltage control unit • Platform extending for long vehicles • Hight limit switch • Easy access grease nipple design • Secondary descending alarm& stop • Rubber pads115x100x70mm 4pcs • Infrared synchronization protection system • Drive-by-wire control
• Full automatic penumatic tilting column. Independent right helper arm, with pneumatic tire lifting device 360 rotary tire pressing helper arm. Four angle directional adjustable tire pressing shovel.
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.