- Inquiry
2 PCS-Tools
• 1PC 300g Engineer Hammer • 1PC 400g Rubber Hammer
About the Product
Product Information
The tool chests or cabinets are a great way to store and organize your tools for your shop or garage. They are manufactured using the highest grade of raw materials available. These steel tool storage systems are secured with a high-security tubular locking mechanism. Drawers are equipped with ball-bearing slides, removable EVA slip-proof liners and full-length aluminum drawer pulls for smooth operation.
Matters need attention
Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning：
1.If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment.
2.Remove any existing rust, with a penetrating lubricant.
3.Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
1.Check daily for any signs of rust or corrosion.
2.Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment：
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments. 6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
Ingredients-
Premium hydraulic oil. P.reventing from oil leakage
Hydraulics are powered with high quality oil,which offers better corrosion resistance and high/low temperature flexibility,allowing unit to operate at temperatures between 40 degrees F and 105 degrees F.
Automatic welded
This valve is welded in fine steel, having the features of handy to operate, good seal, reliable performance and having the function of automatic air-locking dropping material.
High Stregth Steel
Constructed of high-grade steel and built to exacting standards for quality and durability.
You May Also Like
Model
3.5 Ton Full-rise Scissor Lift
0.75/0.55/1.1kw Car Tire Changer
Pro Tool Cabinet
1250 LBS Engine Stand
10Ton Chain Block
340KGS ATV Loading Ramp
Features
• It takes up little space. • Pneumatic unlocking.Adopt pneumatic safety lock structure (with synchronousunlocking safety device) • Fast lifting speed with quiet working condition. • Safe and reliable. • The retractable platform is suitable for various vehicle maintenance. Optional height limit switch. • Pass 115% Gn dynamic overload and 150% Gn static overload test. • Hydraulic double cylinders (series main and auxiliary cylinders). • 24V safety voltage control, through the control cabinet panel to control the rise, fall,and pneumatic unlocking. • The fixed position of the cylinder is modularized, which is convenient fordisassembly and maintenance.
• Full automatic penumatic tilting column. Independent right helper arm, with pneumatic tire lifting device 360 rotary tire pressing helper arm. Four angle directional adjustable tire pressing shovel.
• Bucket lock for securing contents • Soft-closing drawer slides for preventing wear and tear • Ideal storage for your workshop or garage • 4 wheels (2 swivel, 2 fixed) for easy movement • Easy assembly
• The wheels construction for more stability and esy rolling. • Adjustable mounting arms, accommodate a majority of engine blocks, both foreign and domestic. • Mounting plate rotates 360 degree and can be locked in 8 different positions. • Heavy gauge tubular steel construction. • Roll-around engine stand assembles easily.
• Heavy-duty zinc plated steel construction • Drop-forged steel safety hooks with latches • Aircraft quality cable • High tensile swivel and yoke add additional strength and security
• ATV Loading Ramp provides you with a way to easily load and unload your ATV and power equipment in and out of the back of a pickup truck. These ramps make transporting your ATV a simple task and a non-skid surface ensures safety in all conditions.